Minelab Metal Detectors

Tesoro Metal Detectors

Fisher Metal Detectors

Garrett Metal Detectors

Industrial / Utility Locators and Metal Detectors 

Sun Ray Probes & Coils

Coiltek Search Coils

Security Metal Detectors

Gray Ghost Headphones

Sun Ray X-1 Probe for the Minelab Explorer:  The Best Probe Available! (Works on  Explorer SE, EX II, XS & S - Must send in your shaft for modification to fit XS, or S)

• Accurate "Bullseye" pinpointing on coin size targets up to 3" deep in discriminate mode - 2 1/2" in pinpoint mode!

• Light weight, waterproof/submersible 1" X 9" probe. Comes with  30" straight cable with strain relief, and mounts nicely along the Explorer's battery compartment.

• Very compact, ultra light switch box mounted on bottom of upper shaft makes for easy switching from coil to probe. Makes coil changes super fast as coil cable will no longer be inserted into upper shaft!

• X-1 gives operator ALL of the same functions as stock coil including accurate visual and audible target ID in both Smartfind & Digital mode, non-motion pinpoint, etc.

• Accurate approximate depth indications from tip of probe to target can be achieved through visual observation of the Explorer's depth gauge (although the scale will be different). Scale is explained in X-1 instructions. Accuracy on coin size targets only.

• No external buzzers or lights are needed as all targets are heard clearly through your detector headphones!

• FULL 12 MONTH WARRANTY!!

Free Ground Shipping

Note: The X1 Probe will work on any model of the Minelab Explorer, but if you have any model other than the Explorer SE, or the Explorer II you must send us your upper shaft for the modification and installation of the X1 probe. For the Explorer SE and the Explorer II the X1 can be purchased pre installed on a new factory shaft!

Call for more Information: 1-865-609-8043 

 Sun Ray X-1 Target Probe for Explorer SE (sold pre-mounted on New Black SE Shaft)

The Probe itself is actually Black (Shown as white in picture).

Your Price: $214.95
Free Shipping (Continental US only)

Please Specify Right Hand (RH), or Left Hand (LH) Swing When Ordering!

• Accurate "Bullseye" pinpointing on coin size targets up to 3" deep in all metal mode! 1 1/2" - 2" accurate tone ID in discriminate mode! (NOTE: Greater depth on larger than coin size targets)

• Accurate visual ID when used with digital meter!

• Uses the Elite / GT BBS circuitry to cancel ground effects and reject most hot rocks!

• No buzzers or lights necessary. All target responses come directly through your headphones! Makes hand held probes obsolete!

• No extra batteries required! 

• S-1 probe is 9" long and 1" in diameter and is submersible.

• S-1 switch box slides onto the meter mounting bracket and the meter slides onto the top of the S-1 switch box allowing you to see the Minelab meter display easier and allows switching from coil to probe and back with the flip of your thumb! 

• Probe is detachable from S-1 switch box for direct insertion to Elite control housing for stand alone detecting/pinpointing!

• Includes S-1  Probe Clip Attachment for attaching S-1 probe along side arm rest when not in use!  

• Ultra Light Weight! The S-1 is small and lightweight. Probe w/cable=7 oz / S-1 switch box=5 oz / overall weight including 2 probe clips=13 oz!

• S-1 switch box comes with a short standard length cable and connects directly into your Minelab or Sun Ray meter.

• Optional 13" Extended cable Version to be used if mounting your Elite / GT control housing under the arm rest. - $184.95

• Optional 50" switch box extension cable available if hip/chest mounting the control housing. - Add $$29.95

• FULL 12 MONTH WARRANTY!!

Free Ground Shipping

Sun Ray S-1 Target Probe for Minelab Sovereign Elite / GT
Your Price: $179.95
Free Shipping (Continental US only)
 

• Fully compatible with the Fisher F-75 & F-70 models only.  The FX-1 is precision built to ensure peak performance.

• Accurate "bulls eye" pinpointing on coin size targets up to 3" + deep depending on settings, operation modes,  ground and moisture conditions!

• New compact, light weight, waterproof/submersible 6" X 1" diameter probe mounts nicely along arm rest for easy access. FX-1 probe and cable weigh approx. 5 oz. FX-1 switch box, connectors, cable and two probe clips, etc. weigh approx. 5oz. - approx. 10 oz total!

• While the FX-1 probe is waterproof the switch box is water resistant and must not be submersed.

• Installation requires no tools or modifications to the detector. Switch box and probe clips are attached by removable velcro lined clips.

• The FX-1 incorporates all of the same functions as the stock coil including visual and audible target ID along with identical pinpoint functions! 

• High quality custom made, durable probe and connector cable used for precision performance. Probe incorporates a 30" straight cable with strain relief for "tangle free" operation.

• Quality high performance toggle switch used for peak performance! (Minimum 100,000 mechanical life operation-as described in manufacturer's specs) 

• Toggle switch shuts off coil as it turns probe on and vise versa. Coil and probe are never on at the same time.

• FX-1 switch box is conveniently mounted  on detector pole in a neutral position (for both right and left hand users) and to prevent toggle from being accidentally switched or bumped by user or damaged by tree limbs, brush, etc. if switch box is brushed or hit during detecting.

• No external buzzers, vibrators or lights are needed as all target responses are heard clearly through your detector headphones!

• No extra batteries required as the FX-1 utilizes the detectors power source.

• Complete installation & operation instructions included. 

FULL 12 MONTH WARRANTY!! 

Free Ground Shipping

Sun Ray FX-1 Mounted on Fisher F-75

Your Price: $179.95
Free Shipping (Continental US only)
 

Sun Ray Invader GI-1 Probe for Garrett GTI Series (GTI 1500, 2000, 2500)

The Sun Ray Invader GI-1 Target Probe has been developed to satisfy the pinpointing and retrieval needs of Garrett GTI  users. We have received many requests for in-line target probes by Garrett brand users for some time due to the popularity of our quality in-line probes for Minelab, White's and Fisher metal detectors. Now Garrett owners can enjoy the same benefits a quality Sun Ray in-line probe has to offer! Here are some of the features of the GI-1:

• Fully compatible with all Garrett GTI  models (including the 1500, 2000, 2500)!  The GI-1 is precision built to ensure peak performance.

• Accurate "bulls eye" pinpointing on coin size targets up to 3" + deep depending on detector used, settings, ground and moisture conditions!

• Light weight, waterproof/submersible 9" X 1" diameter probe mounts on top of upper shaft for easy access. GI-1 probe and cable weigh approx. 6 oz. GI-1 switch box, connectors, cable and two probe clips, etc. weigh approx. 5oz. - approx. 11 oz total!

• While the GI-1 probe is waterproof the switch box is water resistant and must not be submersed. (We use the same connectors as Garrett.)

• Installation requires no tools or modifications to the detector. 

• The GI-1 incorporates all of the same functions as the stock coil including visual and audible target ID along with identical pinpoint functions! (The GI-1 probe is non-imaging and depth reading will be off due to the probe's diameter, which is normal.)

• High quality custom made, durable probe and connector cable used for precision performance. Probe incorporates a very flexible heavy duty custom 30" straight cable with strain relief for "tangle free" operation.

• Quality high performance toggle switch used for peak performance! (Minimum 100,000 mechanical life operation-as described in manufacturer's specs) 

• Toggle switch shuts off coil as it turns probe on and vise versa. Coil and probe are never on at the same time.

• GI-1 switch box is conveniently mounted  on detector pole attachment in a neutral position (for both right and left hand users) and to prevent toggle from being accidentally switched or bumped by user or damaged by tree limbs, brush, etc. if switch box is brushed or hit during detecting.

• No external buzzers, vibrators or lights are needed as all target responses are heard clearly through your detector headphones!

• No extra batteries required as the GI-1 utilizes the detectors power source. 

• Complete installation & operation instructions included.

FULL 12 MONTH WARRANTY!! 

(Shipping Wt. 2 lb)

Sun Ray GI-1 Probe for Garrett GTI

Sun Ray Invader GI-1 Probe for Garrett GTI (1500, 2000, 2500)
Your Price: $179.95
Free Shipping (Continental US only)
 

Only $179.95

• Fully compatible with the Garrett ACE 150 & 250 models and with the flip of a switch is compatible with the GTP 1350 and GTAX 550, 750 & 1250. (NOTE: Early GTAX models including the GTAX 350, 400, 500 & 1000 are not compatible due to a different "center pin" connector used. The YF-1 is precision built to ensure peak performance.

• Accurate "bulls eye" pinpointing on coin size targets up to 3" + deep depending on detector used, settings, ground and moisture conditions!

• New compact, Light weight, waterproof/submersible 6" X 1" diameter probe mounts on top of upper shaft or along arm rest rod depending on model) for easy access. YF-1 probe and cable weigh approx. 5 oz. YF-1 switch box, connectors, cable and two probe clips, etc. weigh approx. 5oz. - 10 oz total!

• While the YF-1 probe is waterproof, the switch box is water resistant and must not be submersed. (We use the same connectors as Garrett.)

• Installation requires no tools or modifications to the detector. 

• The YF-1 incorporates all of the same functions as the stock coil including visual and audible target ID along with identical pinpoint functions (depending on model)! (On the GTP the YF-1 profiling function accuracy may be off and depth reading will be off due to the probe's diameter, which is normal.) 

• High quality custom made, durable probe and connector cable used for precision performance. Probe incorporates a very flexible heavy duty custom 30" straight cable with strain relief for "tangle free" operation.

• Quality high performance toggle switch used for peak performance! (Minimum 100,000 mechanical life operation-as described in manufacturer's specs) 

• "Mode" switch (see lower left photo) shuts off coil as it turns on probe and vise versa. Coil and probe are never on at the same time.

• New "Detector Selection Switch" (see lower right photo) allows you to switch between ACE series models and GTP/GTAX series models for proper  Target ID and operation!

• FULL 12 MONTH WARRANTY!!

Free Ground Shipping

Sun Ray Invader YF-1 Probe for Garrett Ace 150/250, GTP and GTAx
Your Price: $179.95
Free Shipping (Continental US only)